OKX Wallet Sign up

An increase in engine oil (a problem that may be OKX Wallet Sign upcaused by excessive engine oil) Excessive engine oil is a problem that often occurs during the maintenance period of vehicles, and if this problem persists, it may lead to many The mechanical problems seen. This article aims to explore the problems that may be caused by excess flowing oil. Let's take a look at the possible problems caused by excessive oil. 1. Burning is unclean. In normal engine operation, the oil will quickly flow back into the vehicle's oil pan for circulation. However, if the engine oil increases, it will cause the oil liquid level to conflict with the piston, and the oil will be sprayed into the gasoline combustion chamber.Smoke will occur when the engine oil burns, resulting in unclean combustion and the release of harmful substances. This will not only have a negative impact on the environment, but also lead to a decrease or damage to the function of the engine. In this way, engine efficiency will be significantly affected, resulting in additional wear, high fuel consumption and serious emission problems. Two. Heat overload car engine oil is designed to slow down friction and circulates effectively when the engine is running. In the case of excessive engine oil, the lubricating liquid fills the oil sump, resulting in an additional burden on the oil pump and lubrication system. The increase in oil will also lead to an increase in engine temperature, because the heat exchange between engine parts is affected. Such excessive heat can cause engine cracking or cracking of parts, which will cause flood-like oil leakage and may spill faulty oil.This is a dangerous mechanical problem that can cause serious accidents on highways. 3. The excessive and increased oil flow of the piston and cylinder damage can not only cause the engine to overheat, but also cause damage and wear to other important parts. As the engine oil increases, the liquid level continues to rise, and the possibility of lubricating liquid entering the cylinder will also increase. If this happens, the piston will be impacted and compressed by the lubricating liquid, generating additional load during operation. The engine is more likely to fail to start or stop for a short time after a failure, so it needs a trailer. Four. The pressure of the oil san is increased. The oil sa is an important component that jams the oil, because the engine oil needs to be filled and circulated to make the engine run. If the engine oil is excessive, it will force the liquid level of the unit to rise, resulting in an increase in the pressure of the oil sap and forming an oil leak.Oil span leakage can have a negative impact on the environment, leading to faulty oil leakage, which will also affect the performance of the engine and gradually reduce its operating effect and life. In a word, excessive engine oil may lead to many serious mechanical problems. When the oil level is too high, the engine must stop to find and solve this problem. If readers find that there is a problem of excess fluid oil, they can consider exchanging oil and liquid, replacing the oil filter, restoring the normal operation of the oil pump or letting professionals solve the problem. It is recommended to solve it in time to avoid causing danger to themselves and others.

Contact Us
Phone：020-83484696