Binance download Android

List of the table of contents of this article:

• 1,How many yards can Jiangxi Isuzu 4JJ1 run
• 2、 What is the reason for the engine shaking of Isuzu 4jj1?
• 3, Wuyang Kaiying engine garbage
• 4, Details and correct usage of Isuzu 4JB1 engine

How many yards can Jiangxi Isuzu 4JJ1 function run

1. The idling speed of the engine is only 600 ring, and the muting effect and fuel consumption performance are very good. The 4JJ1 diesel engine is equipped with Getrak's gearbox, which can be called a golden combination, and the fuel consumption per 100 kilometers is only about 8L.

2. This data is the same standard as the 4JJ1 of the previous national fourth version of ISUZU 0T, and the M9T can reach peak torque at 1500rpm and continue to 2750rpm. This data exceeds 4JJ1. It can be said that it is very good in the same type of products.

3. In addition, many off-road vehicle owners will modify their cars to improve off-road performance. The 4JJ1 0T diesel engine equipped with Isuzu mu-X has great potential for modification. You don't have to be surprised to see the modified version of Isuzu mu-X driving on the street.

4. I checked that the dial is up to 220, but you definitely don't buy a pickup truck for racing, do you? Personally, I think about 150 is relatively easy. However, it also depends on whether you are fully loaded. The more goods you pull, the slower you should drive. Safety is the first.

What is the reason for the engine shaking of Isuzu 4jj1?

This is generally caused by the slippage of the belt; there will also be a sharp sound of dry friction of metal parts when the engine is running, which is generally the cause of damage to the bearings of the generator, water pump and steering booster pump; if it is the sound of engine running air leakage, it may be that the exhaust system is blocked, the vacuum tube is leaking or broken. The result of cracking.

The reasons for engine shaking are: engine carbon accumulation, fuel failure, engine cylinder shortage, and loose or aging of the foot glue.The engine accumulates carbon.

A reason that cannot be ignored is "carbon accumulation". Carbon accumulation will cause insufficient combustion of gasoline and cause the engine to shake. The impact of engine carbon accumulation on the car is quite large. First of all, it reduces the engine power, that is, the power output is uneven and gradually decayed, in other words, it is becoming more and more weak.

Wuyang Kaiying engine garbage

1. No garbage. Wuyang Kaiying is a medium and high-end sedan under Guangzhou Automobile Group Co., Ltd. The engine brand it carries is the 4JJ1 diesel engine of Japan's Aisin, which is one of the main products of ISUZU Company. It has the characteristics of energy saving, environmental protection, strong power, etc., and has been widely recognized in the domestic and foreign markets. Can be applied.

2. The power is weak and weak, and it is difficult to start uphill. After the engine is hot, the sound is loud when accelerating, and the speed cannot be increased. Wuyang Honda WH125-17A is a national four-injected version of Kaiying curved beam. It is an all-electric start-up without a foot start-up lever. If the battery is not charged, you can try to start the three-speed cart.

3. Wuyang Honda Kaiying 125 electric injection curved beam car. This car is very good and durable, but the disadvantage is that the power is weak. Overall, it is a very durable model.

4. Jialing cococross125 and Wuyang Kaiying 125 are two scooter models. The following is an analysis of their advantages and disadvantages: Advantages of Jialing cococross125: Powerful power output: Jialing cococross125 equippedA 125cc engine with high power output can provide good acceleration performance.

5. The power of Wuyang Honda Kaiying is obviously much stronger than that of the Weiwu 100, with better acceleration and higher speed. The stability of the car body is also stronger than that of Weiwu 100. The driving performance is better, and the engine is also more durable, but the fuel consumption of the two cars is actually similar. Although the Kaiying has a large displacement, the actual fuel consumption is similar to that of Weiwu. .

Details and correct usage of Isuzu 4JB1 engine

taboos of jb1 engine: do not clean carbon accumulation for a long time, do not use it for at will, do not scale at will, do not burn , do not distinguish between cold and hot, do not misdiagnose, and do not install too tightly.

The method of ignition time of Isuzu 4JB1 engine: align the X mark on the teeth of the crankshaft to the middle of the XX on the bridge teeth; aim the YY on the camshaft with the Y mark on the bridge teeth; aim the Z sign on the bridge teeth to the Z of the bridge teeth above; and the V pair of the bridge teeth above The V sign of the quasi-oil pump.

Maximum torque: 172 Nm/2000 rpm. Idling speed: 750 rp. Maximum idle rotation: 4,200 returns. Minimum fuel consumption rate at full load: 224g/kwh. There are also brands like Isuzu and Suzuki that directly use Japanese Roman characters as trademarks: Fujitsu FUJITSU. KONIKA. Sony SONY. Panasonic Panasonic.

Then turn to the upper stop point of the four-cylinder, adjust the four-cylinder inlet row, two-cylinder row, and three-cylinder in-cylinder in-row.The cold gap is also 0.4. According to the ignition order of the cylinder, after determining the stop position of a cylinder piston on the compression, the gap between the inlet and exhaust valves of the cylinder can be adjusted; after the adjustment, the crankshaft is shaken and the valve gaps of other cylinders can be gradually adjusted according to this method.

JB1 is a light vehicle diesel engine developed and produced by Isuzu of Japan in the late 1970s. Introduced in China in the mid-1980s, it was widely used in light trucks, pickup trucks, SUVs and other models, and won a large market share with its strong power, low fuel consumption and durability.

Equissed with a 6-liter inline 4-cylinder naturally aspirated engine, this engine is from Shenyang Mitsubishi, codenamed 4A92, matched with a 5-speed manual transmission, with a maximum power of 90KW and a maximum torque of 151N·m. The oil supply methods are all multi-point electric injection.The driving mode is all front-wheel drive.