Binance US

List of contents of this article:

• 1, Principle and use of winch
• 2 , What is the car winch for
• 3、Car winchWhat oil is added
• 4, The original of the winch Reason

The principle and use of the winch

The working principle of the car winch: through external power, it is converted into the tensile force of the cable, so as to pull the immobile car out of trouble. Of course, it can also help drive The driver removed the obstacles on the road.

[Pacific Automobile Network] The principle of the car winch is to convert it into the pulling force of the cable through external power, so as to pull the immobile car out of trouble. Of course, it can also help the driver remove obstacles on the road.

The principle of the winch is to convert the external power supply into cable tension, so as to pull the stationary car out of the fault. Of course, it can also help the driver remove obstacles on the road. Car winches are used when vehicles encounter difficulties in harsh environments such as snow, swamps, deserts, beaches and muddy mountain roads.

What is the car winch used for

1. The principle of the car winch is to convert it into the pulling force of the cable through external power, so as to pull the immobile car out of trouble. Of course, it can also help the driver remove the road. Obstacle.

2. The principle of the winch is to convert it into the pulling force of the cable through external power, so as to pull the immobile car out of the predicament. Of course, it can also help the driver remove obstacles on the road;It is used when the car is driving in harsh environments such as snow, swamps, deserts, beaches, muddy mountain roads, etc., and the vehicle is in trouble.

3. It is mainly used for off-road vehicles, agricultural vehicles, ATV all-terrain vehicles, yachts, fire rescue vehicles, road clearance vehicles and other special vehicles and special vehicles.

4. The principle of the winch is to convert the external power supply into cable tension, so as to pull the stationary cart out of the fault. Of course, it can also help the driver remove obstacles on the road. Car winches are used when vehicles encounter difficulties in harsh environments such as snow, swamps, deserts, beaches and muddy mountain roads.

What kind of oil is added to the car winch

Keep the wire rope in goodA good lubrication state can reduce the wear of the steel wire rope and greatly extend the service life of the steel wire rope. It is recommended to use the steel wire rope to supplement the special maintenance lubricant for lubrication, which can penetrate into the interior of the steel wire rope, which has a good effect.

There are many kinds of automobile winches, mainly electric winches, mechanical PTO winches, hydraulic PTO winches, hydraulic winches, etc. Among them, electric winches are the most popular and the most familiar to people. Electric winch Electric winch is powered by the car battery to drive the motor and the winch.

Clean up the winch after disassembly, and then apply lubricating oil. Specific maintenance method: the winch removed from the car, check the appearance for obvious damage, such as scratches, potholes and other hard injuries. Check the external line. If the insulation foreskin is damaged, it should be replaced in time.

the principle of winch

the working principle of car winch: through external power, it is converted into the tensile force of the cable, so as to pull the immobile car out of trouble. Of course, it can also help the driver remove obstacles on the road.

The principle of the car winch is to convert it into the pulling force of the cable through external power, so as to pull the immobile car out of trouble. Of course, it can also help the driver remove obstacles on the road.

The principle of the winch is to convert it into the pulling force of the cable through external power, so as to pull the immobile car out of the predicament. Of course, it can also help the driver remove obstacles on the road. The purpose is that when the car drives in snowy, swamps, deserts, beaches, muddy mountain roads and other harsh environments, the vehicle is trapped. At the time of the situation.

Forward operation: When you need to use the car winch in a positive way, you first need to turn on the power through a manual switch. At this time, the current will flow from the power supply to the positive pole of the winch. Then, the first contactor will close, start the motor and start the winch to rotate.

A U-shaped hanging ear and a tight-line pulley. The belt is used to fix the fulcrum. Its ideal length is 5 meters to 2 meters; the u-shaped sling can connect the hook to the belt and winch.Therefore, it is best to prepare several sizes of hanging ears; using two-wire or three-wire to change the direction of dragging, a tight-line pulley is needed.

The principle of the winch: Simply put, the working mechanism inside the winch is that the power from the car first drives the motor, and then the motor drives the drum wheel to rotate, the drum wheel drives the active shaft, and the active shaft then drives the planetary gear, thus generating a strong torque. Then, the torque is transmitted back to the drum wheel, and the drum wheel drives the winch.